To change the front wheel studs on a 1993 Chevy S10, you will need to remove the tire and brake caliper. If it is a floating rotor, you will need to remove the rotor. To install, you will need to use a special tool for removal. If the tool is not available, be prepared to use a large nut and washer for installation.
I belive they are the knock out type take off wheel and drum heat studs on the back hit from front. to replace put new studs in and put back on tires.
You replace the wheel bearing hub assembly - it has studs, bearings and wheel speed sensor around $100 part
Pound your 2002 Suzuki left front wheel studs out. You will need to pound in the new studs in the same manner that you removed the old studs.
HOW DO YOU CHANGE FRONT WHEEL STUDS ON A 1995 CHEVY LUMINA AUTOMOBILE?
Unbolt hub and press out wheel studs, clean hub face, replace rotor and press wheel studs back through, remount hub
You have to have the hub pressed out of the knuckle to replace the wheel studs.
You need to get the rotor off to replace studs with new ones.
Remove the brake drum, drive out he damaged studs from the front of the drum, press in the new ones from the back of the drum, reinstall the drum.
No.
you dont
You have to remove the caliper and then the rotor and tap on the front of the stud with a hammer so that it slides out from the back.
Front or rear?