1. jack the vehicle up on both sides, use jack stands if possible.
2. Remove Passanger front tire, along with plastic splash shield
3. Drain coolant
4. With serpentine belt still installed, loosen the 3 bolts on the water pump
pully, don't take them all the way off, just loosen them.
5. Use a 14mm wrench to reduce tention on the serpentine belt enough
so you can slide the belt off
6. Remove the water pump pully bolts, remove pully, or let it rest on the
pump shaft.
7. Remove water pump housing bolts (6 of them) and discard the gasket
8. reverse procedure to reinstall new water pump
how do you replace a water pump on a 1993 lexus es300?
How do I replace the water pump in my 1994 Saturn SL2 series standard twin cam.
The water pump on a 94 Saturn S1 is replaced by removing the serpentine belt, engine accessories, and water hoses. The pump can then be unbolted from the engine block and a new pump put in place.
See the related question: How do I replace the water pump on a 1993 Geo Prizm 1.8L?
If you are referring to the water inlet hose on the back of the water pump you can use this question as reference. How do i replace the water pump on a 1993 Geo Prizm 1.8L?
The water pump is located in the middle of the front of the engine. The water pump is fairly easy to reach and replace.
About $500 to $600 for the belt, and another $150 or so for the water pump.
if the bearing is noisy or the pump is leaking replace the pump.It is a job to replace but if you wanat to get a manual on your car from DISCOUNTAUTOREPAIRMANUALS.COM
water pump has some (2) pins into the block...it needs to be pryed stright off.
If you have ever replaced a water pump on any vehicle the answer would be "yes" you can do it yourself.
If it is noisy, leaking or not pumping sufficient coolant to cool the engine, replace it.
Ooh, this is a fun one. The water pump is driven by the timing belt, so you have to remove and replace that to change out the water pump. ~Pengauin