replacing achieva serpentine on a 96i have a 96 and you have to completely remove the motor mount and all of the bolts holding it on the engine to replace the belt,also carefully jack up the engine since it will fall on the ground if you take off the mount
It is located under the car close to the gas tank
it looks to me on mine that mine is in the middle of the back window u should see a little black think sticking up inside ur car in the back window.
Listed under the hood on a placard and in your owner's manual. .060 is the gap on a 2.4 liter
I am trying to do this myself,any suggestions ========== Do not turn transmission! I myself, 8/29/09
Remove the upper intake and there it is.
Yes they should be interchangeable
replace the radio fuse with the motor running, it'll reset the unit.
Perhaps transmission fluid is "breaking down" at high temp. Try changing fluid and filter
Cant Must replace entire radio
The PCM is located at the back wall under the hood, next to the master cylinder, it's a black round tube like box that is mounted to the back wall.
Well I know its not 3/8 tried T-55 T-50 T-60 none worked