As this operation requires the refrigerant to be evacuated and stored in a manner approved by the EPA, an ASE certified tech in an EPA certified shop is required by law to do this. This operation also opens up the AC system, which means that the receiver-drier (if it's a Thermal Expansion Valve system) or accumulator (if it's a Fixed Orifice Tube system) must be replaced, as well.
how to replace AC compressor on a 97 Buick park Ave
I need to know how do i replace a haeter core on a 1994 buick park avenue?
Remove headlight assembly to access bulb/socket.
The PCV valve on a 2002 Park Avenue is on the passenger side of the engine. It is close to the manifold under the map sensor.
The PCV valve on a 1995 Buick Park Avenue is located on the top of the valve cover. Twist the valve and pull to remove and replace it.
It is in the drivers manual.
The cost to replace a head gasket in a 1997 Buick Park Avenue ranges from $20 to $180+. This varies based on brand, store and labor costs.
18 or 19 gallons
It is in the intake behind the throtle body. Simply pull it out and replace it.
See the related link below.
Cost $700 in labor to replace the flasher as the dealer could not locate it. Supposedly the entire dash had to be removed on my 1997 Park Ave..
in the passenger wheelwell, take off the tire