0
If this is a RWD Cutlass Supreme, ask the question again as:
"How do you replace rear axle bearing on olds cutlass supreme?"
Otherwise, remove the rear brake rotors and calipers if 4 wheel disc, drums and shoes if rear drum.
Disconnect the rear wheel speed sensor electrical connector if 4-wheel ABS.
Unbolt the four bolts holding the hub and bearing assembly to the spindle. I believe you will need a t45 or t50 socket. If you don't have a socket of the appropriate size, buy one. Remember that cheap sockets ruin bolts and ruined bolts ruin days.
Use a hammer (about 1.5 to 2 pounds) to knock the assembly free. Hit it on the left side, right side, top, and bottom alternately.
Use a bit of grease to ease reinstallation.
Add your answer:
Earn +20 pts
Can i replace my 95 cutlass supreme transmission with a 92?
no it ruins the steering wheel
Is a 1987 cutlass ciera a rerwheeldrive car?
I have 2 of these cieras and NO they are front wheel drive, the cutlass supreme is real wheel drive
Do you need to replace the wheel bearing when replacing brake discs on a mark 4 golf gti?
no need to replace wheel bearing unless the wheel bearing is worn out
What is the horsepower of a 1987 Oldsmobile Cutlass Supreme?
The 1987 Oldsmobile Cutlass Supreme was rated 350 horsepower with the with the V8 engine. It was last year that the Cutlass was a rear wheel drive vehicle.
What is the wheel bolt pattern on a 1986 Oldsmobile cutlass supreme?
5x4.75
How do you replace the rear wheel bearings on a Ford Courier?
How do I put a wheel bearing on with out a wheel bearing press
How do i replace therear wheel bearing on a Chevy pick-up?
how do you replace the rear wheel bearing on a Chevy pick up
How do you replace front wheel bearing on 1996 Hyundai Elantra?
how to replace front wheel bearing on 1996 Hyundai elentra
Why would ones driver side rear brake lock up on a 1996 Cutlass Supreme?
Replace wheel cylinders and check rear proportioning valves.
How do you replace the alternator on a 1995 Oldsmobile Cutlass Supreme?
You have to remove the passenger side wheel, and inner fenders, then the drive axle and heat shield, then you can get at it. From underneath.....sorry.
How do you replace a wheel bearing on a kawasaki mule 3010?
You can replace the front wheel bearing, on your Kawasaki Mule 3010, by removing the axle. With the axle Remove the wheel bearing will slide off.
How do you change the blinker handle on a 91 cutlass supreme?
take your steering wheel off (need a steering wheel puller). there should be a small screw at the end of the arm. remove this screw and replace the handle.
