no no
Rear end of what?
Answer : unscrew the signal lens and remove the signal bulb and replace with 1157 bulb reverse process
your rear bulb is blown - replace the bulb The turn signal blinks fast because the bulb is going out. That is also why the others dont blink.
The rear turn signal on the 2009 328i is an array of LEDs and isn't a single bulb which can be replaced. The whole assembly needs to be switched out.
Open the rear hatch of your van. There are two black button like protrusions behind the hatch next to the turn signal lamp. Pry these out and remove lens. Replace bulb.
rear you use a torx driver to remove taillight assembly screws. them replace bulb.
Turn signal what: front bulb; rear bulb; flasher unit; fuse???See "Related Questions" below for each
Righty tighty, lefty loosey.
Replacing the turn signal bulb in the rear lights is an easy task. Open the tailgate. Remove the two screws on the inside of the black casing and pull the light housing toward the outside of the vehicle. Twist the bulb socket 90 degrees, remove the bulb and replace with a new one.
Just turn the housing the bulb is in and pull it out. Remove and replace the bulb the same way. For the rear lights, you have to push on a tab to release the housing the bulbs are in.
For the front turn signal on a Chevy S-10 you remove the parking lamp lenses and replace the bulbs. If it is a rear turn signal bulb the taillight lenses will have to be removed to access the bulb.