Need to know the model in order to answer this.
* Remove the mirror trim cover from the door panel * Remove the three mirror retaining nuts and detach the mirror from the car
2006 saturn ion shift solenoid
very carefully
All you have to do is remove the black cover on the inside corner be careful as it is clipped and it is easy to break..The nuts holding the mirror are 8mm just remove them..Disconnect the wire connector and it pops right out...
I think you have to take off the inner door panel and remove from there...Rick D
Replace air pump
I don't know about the 2003, but I recently bought a 2006. When the power mirror adjustment button is selected to make the driver's side mirror active - that is, to adjust that mirror - the passenger's side mirror will rotate down when you shift into reverse. If the adjustment button is selected to the passenger's side, the mirror will remain stationary when you shift into reverse.
first remove the screws in the door panel then remove inside door handle 10mm screw on the inside edge of handle.gently lift up on the door panel.now you have acess to the electrical connector and the three nuts that hold on the mirror
Ford didnt make a Fusion till 2006
Front passenger side. The plug is facing towards the rear of the car.
1500 2500 3500 or denali? Try this site out it gives step by step guide on what to do, parts, etc. Plus has pictures to help as well. I just did a basic gmc sierra. http://www.carpartswholesale.com/diy_center.php?part=Mirror&sku=GM59L&brand=Kool+Vue