thats what i am trying to find out? thx
Wiki User
∙ 12y agohow do I replace a fuel pump on a 1993 Ford Bronco 302 5.0 L
It is in the fuel tank attached to the fuel pump. Remove the fuel tank , replace the unit and reinstall.
Chainsaw
On a 1992 Ford Bronco : The electric fuel pump is INSIDE the fuel tank
If it is the same as the ( 1996 ) Ford Bronco : ( Relay # 2 is the fuel pump relay )
where is fuel shut off switch for Ford Bronco eddy Bauer
Replace fuel pressure regulator.
Remove fuel tank Remove fuel pick up and sender assembly.
On a 1996 Ford Bronco : The ELECTRIC fuel pump is INSIDE the fuel tank * it is installed through an access hole in the top of the tank
You either have a bad connection or a abad sending unit. Check out the wire to the tank and connection at the sending unit . .
fuel sending unit may be corroded i kno i had my 1993 bronco with a 5.8L sittin in storage for bout 7 yrs before i was able to bring it out and my fuel sending unit went to junk obviously, but that's usually the main reason for the gauge not working, that is if its stuck on way past full tank or completely on E its the sending unit
The Ford Bronco has two fuel pumps- one low pressure feed pump inside the tank that necesitates removing the fuel tank to replace, and one high pressure pump midway along the driver side of the vehicle on the frame rail. Trace the fuel lines forward from the tank to find it easily.