remove wheels
knock studs out with a hammer
insert new studs from the back side of rotor
place a thick flat washer over the the sud against the front side of rotor
using the wheek nut, tighten wheel nut which will pull stud back into rotor until seated
remove wheel nut
replace wheels
if the suds to be replaced are on the rear, you will need to remove brake caliper and then remove rotor from vehicle
the rear rotor is a combined disk brake and drum brake for the emergency brake
this will come off with a wheel puller or by knocking with a hammer
onece removed knock broken suds out then insrt new ones. can then use a hammer to seat new ones
reinstall rotor and caliper. replace wheel
you cant
dodge truck broken hood latch
remove the broken glass and take it to a glass place you wont be able to replace yourself because glass has to be sealed by a special type of glue
2002-2005
No
buying a dodge was your first mistake
If you have the right kind of ez out,pull the piece out. Freeze the net tube over night and install it real quick.
No you can not
The tension pulley should have a bolt that holds it on, allowing you to replace the unit.
the best way to fix a broken dash is to replace it. It's much easier ,and cheaper to just replace it, that's what i had to do. sorry.
To replace the water pump in my 2001 Dodge Ram 1500 v8, it was $375 including labor and everything.
you dont need to remove hub just remove the caliper and spider washers on studs