Remove the window regulator and motor from the door as an assembly. Drill out rivets that hold motor to regulator and replace motor. Regulator needs to be riveted back into door for reassembly
Remove the door panel. Remove the bolt that fastens the regulator to the window. Remove the 3 bolts that hold the regulator assembly to the door. Squeeze the entire assembly through the largest hole and replace with a new assembly in reverse order.
bang
The Regulator for a 1994 Deville is mounted on the fuel rail. Disconnect the battery, then relieve fuel pressure. Remove the vacuum line from the regulator and unscrew it to replace.
To remove the rear window regulator on a 1994 town car, remove the screws under the arm rest. Take off the rubber insulation and unplug the speaker wires to get it our of the way. Finally, remove the window regulator.Ê
May be a bad fuel pressure regulator.
its easy just take off the door panel, disconnect the wiring harness and take the screws out of the mount for the window motor and it comes rite out
The regulator is part of the engine computer. You will have to replace the computer.The regulator is part of the engine computer. You will have to replace the computer.
this link provides step by step instructions plus photos: http://g20.net/forum/showthread.php?t=36031
Can you put a 1994 thunderbird motor in a 1996 thunderbird?
Usually it's either the window regulator or window motor. You can buy both online for about half of what the dealer will charge for the part. It could also be the master switch on the driver's side, but if all the other windows are working fine, I'd replace the regulator and motor. I bought the regulator with motor combo for $81 delivered recently and my window is working perfectly now.
Look on eBay for the repair kit 3 small plastic parts that will repair the window moter for about 6.00 and if you need a regulator they are there to for 20.00 to 45.00