Disconnect the battery, Remove the door panel, vapor barrier plastic, power window connections, and I would remove the entire regulator assembly with motor attached. It helps to have someone hold the window as it drops inside of the door. Some motors are riveted to the regulator at the factory, so if it is I would obtain a good used assembly at a salvage yard. I have done these in a couple hours. Looks harder then it is.
power window motor removal 93 sunbird
check your fuses, if not, replace the window motor located in the door.
You will have to remove the door panel and replace the regulator assembly. In some cases it comes as an assembly with the motor.
The outer and inner door panels on the door must come off. FRom there you have access to the rivets holding the motor to the door. Break the rivets and replace with the new motor. The new motor should come with bolts if from the dealer.
Most likely the window motor is dieing. If you want to replace it you can. It is not easy but it is possible to fix. Remove the door panel. Find the motor and drill out the rivets or get the old motor out by any means necessary. Unplug the motor Bolt in your new window motor and plug it back it. Before you replace the door panel, turn your car back on and make sure that the window motor is working. If it works replace the door panel. If not check the fit of the motor and the wiring. takes about 3 hours your first time if you have all the tools you need and know how to get the door panel off.
What question
how do you change a window motor on a 93 aerostar or can you please tell me how to get the windows down without the motor... my e-mail is snakespittbulls@yahoo.com
you have to drill out the rivets
Should be at the front of the motor under the air breather on your intake.
its located beneath the air intake on the front side of the motor
You will have to replace it. The bearings are worn out in the blower motor.
How do i change the window on a 95 chevy astro van