Try lubricating lock mechanism Try adjusting mechansim Replace locking mechanism
First you need to remove the trim bezel around the handle on the outside of the tailgate. Then remove the three bolts on the inside of the tailgate,that hold the handle in place. Next remove the latching mechanism rods from the handle,and remove the handle from the tailgate.
i have a 1999 Chevy silverado and i do know that i had to take mine into dealer for replacement parts. check out the recalls for 1999-newer and they have the tailgate parts as recalled and will replace some of them for free, including free labor. hope that helps!
The interior door handle on a Hyundai latches onto the locking mechanism of the door. First remove the old handle by unscrewing it from the door panel. Pull the handle out and remove the locking wire. Install the new unit with the locking mechanism in place. Tighten the mounting screw.
You can replace the locking cylinder, on your 1994 Ford Thunderbird, by removing the inside door panel. The locking mechanism will be visible with the door panel removed.
locking mechanism is buggered.. have to unlock manually and replace
How do you replace the tailgate lock on a isuzu wizard 1999
Remove the panel behind the latch then remove the clip from the lock and it comes right out, it isn't connected to any mechanism inside the tailgate.
You can take the lock assemblies at the dealer and they can replace the tumblers. You could also buy 2 new locking assemblies for both front doors and just replace them both. Might be about the same cost money-wise.
The tailgate latch comes off with the cable. It is one piece.
The door handle of a 1996 Pontiac Grand Prix can be replace because broken units will can not be fixed. To replace a handle remove the unit from the door and unhinged the locking mechanism.
The tailgate cables on the S10 may have to be drilled out and must be riveted in place. GM has a recall on these cables and will replace them, parts and labor for no charge at the dealership.