Your vehicle is equipped with struts. Answer Provided By Freeautomechanic.com == To Remove: # Remove the three upper strut-to-body mounting nuts. # Raise and safely support the vehicle. # Remove the rear tire and wheel. # Disconnect the stabilizer bar link from the strut. # Scribe the strut to the knuckle so it can be installed in the original position. # Support the knuckle and hub and then remove the strut to knuckle bolts. # Remove the strut from the vehicle. To Install: Rear strut assembly removal/installation # Position the strut on the rear suspension. # Install the strut to knuckle bolts. Tighten the bolts to 90 lb ft (122 Nm). # Connect the stabilizer bar link to the strut. # Install the tire and wheel assembly. # Install the three upper strut mounting nuts. Tighten the nuts to 30 lb ft (41 Nm). # Lower the vehicle. # Check and adjust the rear wheel alignment if necessary.
Where is the lowside service port on a 2000 buick century?
yes
i have a 2000 buick century and the evap comes on where and what could be setten off the evap ?
2000 Buick century gap for spark plug 3.1l
I have a 2000 Buick Century costom and I replaced it but it leaks what could be wrong
The filter is behind the left headlight, Take the ducting off and get to the filter to change it.
No
The cost to replace the shocks and struts on a 2000 Dodge Neon ranges from $120 to $1,000. This cost ranges based on the part brand and any special additives.
Underneath the right headlight
I have a 2000 Buick Regal GS how do I change my front sway bar
Get a Haynes Manual, A Chilton Manual. You can get them at Autozone, Advance Auto, or Napa. They Run under $20. And they are very helpful.
Replace window regulator.