Open the trunk. On the side of the lamp housing facing the trunk there are two 6pt screws. Remove these two screws and you will be able to grab hold of the lamp housing (the entire tail light assembly) and slide it out towards the rear of the car. Now you can access the bulbs from the rear of the lamp housing.
Just received letter for recall to replace entire tail light assembly. Check with dealer to see if your car is covered.
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
There is a campaign on the brake bulbs for 2000-2003......If it hasn't been done you should get it done. The bulbs and sockets will be replaced.
how to replace the brake light switch at the pedal of a 2001 ford zx2
To replace the brake light on a 2000 Pontiac Montana open the trunk to reveal the housing units. Find the lights and pull the bulbs out. Replace the units.
Pull the carpeting behind the brake light. Unclip the assembly, replace bulb.
How can I replace the headlamp on a 2000 Saturn SL1
There is a sensor in the top of the brake cylinder where you put in the fluid. Replace it and the light will go away.
Just unscrew the rear brake light, turn out the socket, and replace the bulb.
check your local mechanic
In the top of the trunk near where the brake light is located, there is a small plastic window, remove it and you access the light bulb.
How do i replace brake lines on a 2000 grand am
Original equipment part for brake light replacement on 2000 Honda Odyssey EX is: 7443 W21/5W STANLEY 12V 03U E4 2DW