i have a 2002 Bonneville also. and to replace the bulb you have 3 bolts inside the trunk you have to unscrew and then the whole fixture will pop out towards the outside and you will have easy access to the whole fixutre. Hope i explained it well enough. any questions, feel free to email me at ... beedubb33@hotmail.com my name is brian
is your e-brake on?
Should be on the upper end of brake pedal
To replace the brake light on a 2000 Pontiac Montana open the trunk to reveal the housing units. Find the lights and pull the bulbs out. Replace the units.
'How do you change a fog light in a 1996 Pontiac Bonneville? ... How do you
I had this problem on a 94 Bonneville after we had fixed the brakes. After I disconnected the battery and reconnected the light went off and the dinging stopped. Not sure if this was related or just coincidence.
replacement of brake light bulb-- open trunk, look on inside of back of tail,brake light housing, there are retaining plastic screw on nuts, maybe covered by trunk lining of fabric. remove retaining nuts and push housing out, have someone to press brakes if not sure of which bulb to replace. locate and twist bulb housing out.
just check the cars manual.. normally in the glove box.
Because it is
In order to change the brake light, check your manual for directions. You will need to remove the cover and replace the burnt out bulb.
The 1997 Pontiac brake light fuse is located in the fuse box. The brake light fuse will be labeled as the tail light fuse.
Have vehicle scanned to determine the problem
"http://wiki.answers.com/Q/I_have_a_1999_pontiac_bonneville_and_the_monitor_light_system_is_on"