if your fuel guage is not working properly it is more than likely your fuel level sending unit which is in the gas tank of your vehicle, to repair, yo must purchase a new sending unit, drop the tank down and out of your car, by disconnecting the fuel and evap lines along with the filler neck and vent tube, and last the 2 bolts holding the straps, then replace the sending unit and bolt it all back together
First check the fuse for the 2003 Cavalier gauge. Next check the fuel sending unit in the fuel tank to insure that its working properly. Check the gauge next, then the wiring for the system. One of these units is causing your gauge to not work.
The fuel sending unit for the fuel gauge would be located in the fuel tank.
According to my Chilton repair manual , fuse # 16 is a 15 amp fuse for the fuel gauge on a 1994 Ford Ranger
Most times the fuel gauge sending unit in the fuel tank is at fault. And once again, most times it requires removing the fuel tank to gain access to the sending unit for replacement.
I'm NOT 100% sure on this answer but do this and we will find out. If you are having a fuel gauge problem then CALL a Chevy parts house and ask them if they sell a FUEL LEVELING SENSOR by itself. If they do then buy it and install it on the fuel sending unit that is inside of the fuel tank and that will fix your gauge for awhile. Overtime the sulfur in the gas COATS the fuel leveling sensor and the gauge goes crazy. You may have to buy the WHOLE fuel pump sending unit just to fix your gauge. That will be A costly repair. Like I said, Don't know if they sell it by itself or not.
The gas gauge and fuel pump are on two separate circuits tand both go inside the gas tank. The gas gauge usesf a float that moves a resistor according to fuel level. Gas gauges. When you experiewnce the gas gauge not working at all I would look for a disconection external to the tank first. If you cna send six volts from the tank sender to the gauge this should cause the gauge to read. If it does then you know the problem is with the sending unit and it must be removed from the tank to repair or replace.
The most common cause for a malfunctioning fuel gauge its the sending unit. It is located in the top of the fuel tank and the tank must be removed to replace it.
Shogun pro 2005 is a digital version therefore, you cannot repair the fuel gauge. just replace it. the gauge meter on the fuel tank can be bought by set
It is likely that your fuel sending unit has gone bad. It is located in the fuel tank. Some tanks have an access hole and others require the removal of the fuel tank to replace it.
depends of course on the nature of the problem(undescribed) but one malfunction could be the sending unit in the fuel tank.
A blown fuse can cause your fuel gauge and speedometer to stop working. Replace the fuse. The fuse can be found in the fuse box. The location of the fuse will be listed on the inside cover of the fuse box.
The fuel pressure gauge will help you check the fuel pressure in a 1997 Sunfire. When the pressure is low their is a repair manual which advises on what steps to take.