Does the hydralic pump on my 4500 backhoe have an intake filter
I have a 1986 Ford 550 backhoe and the transmission uses hydralic oil
I am not positive but from what I've read online its around 9500 lbs with loader and backhoe.
That is a Ford 550 backhoe.
My brotjer fixed his 2005 ford freestyle and it was about $4500. It depends on the labor charge the shop has
Yes and No. Your tractor would have to be equipped with a three point hitch. Some backhoes had the option most did not.
Depends on what exactly is wrong with it :) Unless it is about simply replacing or adjusting the clutch cable, replacing the clutch involves removing transmission out, which means taking the axles out etc.
CHiltons forrd truck manual
The rear axle oil level plug on a Ford 4500 backhoe is located about 2" above the right hand running board near the rear end of the running board. This is 5 or 6" directly behind the transmission level plug and is located on the round access cover plate. If you have a cab, the plate under the seat (4 bolts) will need to be removed in order to replace the level plug unless you can find someone with small fingers to reinstall it for you. Mine took about 23L to fill from empty.
Yes Ford has made backhoe's and heavy equipment for many years. The most common model used today is the 655 and it appears to be highly recommended.
9500 lbs
where is oil cap