I removed the bench seat by removing the seat tracks...4 bolts on each side beneath the carpet. I just use the the 2 rear bucket seats now and take them out when I need the room for cargo. Saves about 150 lbs which gives better performance as well. You could also take the tracks to a machine or welding shop and have them cut off the rear of the tracks where the stops prevents you from sliding the bench seat out. I thought of that but really haven't found the need for the 3rd seat, so I'm sticking to the former approach.
-----
1 - remove the middle row for easy access
2 - remove the 6 bolts attaching the seat to the sliding brackets
3 - remove bench seat from van. It is very heavy.
To remove sliding brackets:
1 - remove trim piece by sliding door or cut away carpet
2 - remove captains chairs in the front seat
3 - unscrew the wiring harness and heater vent
4 - lift carpet & wiring harness while sliding the seat bracket off the track.
5 - repeat on other side
6 - reassemble everything.
A 1994 Mercury Villager, also known as a Dodge Caravan, can have its rear hatch removed by detaching the pistons which hold it to the body of the van. The pistons will be held by screws and removing them will allow the hatch to easily come off.
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
With the correct sized socket, obviously.
The rear seat does not come out. The middle seat is removable, after which you can slide the rear one up.
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
You will need to remove the inner panels to gain access.
Support the transaxle and unbolt it. You may have to remove some things to get clear access to it.
On a 2000 Mercury Villager : The washer fluid for the rear liftgate is supplied by the same reservoir as the windshield ( located in the engine compartment )
No such option was available.
On the rear side of the throttle body.
The washer fluid for the rear liftgate is supplied by the same reservoir as the windshield in a 2000 Mercury Villager