i have mercury mountaineer 2004 i remove first the cover around the radio is a press ion when you remove you have to take 4 screw 2 in left 2 in right them put in front slow them disconnected the harness and antenna .
fuel gauge not working and power windows and radio.2004 mercury mountaineer.
behind the radio, to the left
If you remove the battery or break the connection to it, you have reset it. That is why the presets on the AM/FM radio disappear. The question is how. You do not have to reset anything except the radio presets and the clock.
i reconnected my battery of mountaineer 2005 and radio is asking for code, i wasnt able to find it any where...how to solve this issue
it doesn't go down.
www.modifiedlife.com
first start by taking the engine out of the car then remove the back bumper then try removing the door then remove the trunk then the exaust pipe then finally you will be able to see the radio in the car remove that and finally take the car to get repaired!!
Its on the right side of the hood. It runs under the hood and through the firewall to the back of the radio
Check out this Web site. www.shareamemory.com. It will give you some insight to a common problem with Ford / Mercury radios. Bad solder job in radio. Must remove and resolder conection.
Its in the dash with te other harnesses...(orange.....i think)
you need a rca adapter interface you can get one at car audio place or check eBay