Wiki User
∙ 12y agoThe inside door panel cannot be removed; instead, to get to the inner workings of the door remove the OUTER panel.
Lift the outer door handle to expose the pins that hold the outer handle to the door mechanism. Then press out the pins and remove the handle.
Then remove the screws around the perimeter of the door that hold the outer panel.
The panel should lift off, exposing all of the inner workings, then you can verify that the inner panel does NOT come off.
Wiki User
∙ 12y agoNo. To remove the widow its easiest to remove the outside panel
Fuse is located in the inside fuse panel. Remove it with the fuse puller
You will need to remove the inside door panel. Remove the door handle retaining screws. Remove the linkage from the back of the door handle.
Check out this site: http://www.bodyshopzone.com/archives/trim/door_panels/Subaru/Outback_2001/remove_fr.html
I thought the fuse diagram was on the back side of the fuse panel cover.
How do you remove the inside door panel of a 2001 ford f150.
How do you remove the inside door panel on a 2002 ford F150 supercrew?
See link below
Using a screwdriver, remove the screws from the panel, remove the clips from the panel, and pull the panel away gently. Remove any wiring connectors, and remove the panel from the frame.
I have a Saturn 2001 300 L . The lights on the inside of car wont work.
Check link below,it shows a gen 2 but is very similar to your gen 3.
Remove the inner panel and open it from the inside, while you're in there you can pull the lock cylinder and replace it with a used or new one.