You you need to remove several small bolts on the lower part of the dashboard on both sides (most are on the bottom by your feet) as well as one inside the glove box to remove the whole dashboard. Take care of the dash vents, the one by left side of the steerling wheel has an insert inside to direct the airflow and there is one located underneath the steerling wheel that is pointed toward your feet. The speakers are located inside sealed boxes that will need to be un-bolted from the car frame to replace the speakers. You shouldn't need to cut any part of the existing grills bult-in to the dashboard to fit most newer model speakers. My speakers still had the factory speaker harnesses attached, so connecting the wires was fast and easy. MAKE sure to color code the wires from the wiring harness by the deck BEFORE you wire up the speakers, the color coding in my car was completely different than the manual or what the wiring kit stated. (PS: the speaker size inside a 1990 is 4" for the front and I used 3 way Autobans w/ a crossover and they fit fine). Putting everything back together the same way you removed it to finish everything off.
http://prodactor.blogspot.com/2005/09/removing-door-panel-from-toyota.html
See the answer for the 93 model if you're referring to the rear ones. If you want to replace the front ones, you have to remove the door panels.
The door speakers in Geo Prizms From 1993-1997 and possibly newer are 4in. and the rear speakers are 6.5in.
The Chevrolet equinox front speakers are held in place with two retaining screws. Remove the retaining screws and the wiring harness. The speakers will come out.
You have to remove the door panesl. The speakers are attached to the doors by screws. Remove the door panel, remove the screws holding the speakers in and unplug the wire connector. Go get some new ones the same size and splice connect the wires to the new connectors. Use shrink tubing or electrical tape over the splices. Put it all back together.
Front speakers are in the door. remove screws on the door panel, then remove the panel and you'll see the speaker
No
Remove the floor sill covering, it has 5 or 6 screws, then you can access the speakers.......
To remove the front speakers from a Chevy Celebrity: 1. Take out the screws from the speaker grills, take the grills out. 2. The speaker is held in with screws, remove them. Lift the speakers out of the dash and unplug the wire harness.
1.- remove the doors panels 2.- remove the old factory speakers
Remove the speaker covers, by loosening the retaining screws. Remove the speaker retaining screws. Remove the wiring harness. The speakers will come out.
You will need to remove the front speaker covers. The speaker covers are held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install your new speakers.