Behind where you use the handle to pull to open the door is a little cap. Use a screw driver to take it off and take out the screw you will find behind it. From there, start to take out the screws that hold the pannel on located at the bottom of the pannel, about 4 of them. You are now ready to just pull the pannel up. the pannel also has a hindge system on it so you can work on the inside stuff without having to take it all the way off the door.
on blinker switch
Lick it.
The 1995 Oldsmobile Aurora blower motor relay switch is located beneath the dashboard on the passenger side. The blower motor relay switch should be labeled as such.
How do remove and replace the ignition switch of a 1983 Oldsmobile Regency?
Fuse, wiring, connector, drivers side window control switch.
Door plunger switch broken or bad.
The only Killswitch is the ignition switch. GM vehicles are not equipped with a fuel pump inertia switch.
at the top of oil filter housing.
i would have the light switch checked to see if it is faulty
Fuse and/or switch Switch located at upper end of brake pedal under dash
The brake light switch is located under the dash drivers side under a sound cover held in place by 2 screws, not that hard to remove.
all you have to doo is take off the black trim around the radio. there is like #3 10 mm screws pull them out and switch radios