0
You need to buy the proper tool, its 2 solid wire shaped like a horse shoe with small balls on the ends. Take both u-shaped tools and insert them into the four holes and push in and the pull the whole unit out.
*Cut a coathanger bend it so you have 2 U shapes and use that, it's difficult but it can be done.
-Fen
Add your answer:
Earn +20 pts
What kind of rearend does a stock 96 ford bronco have?
what kind of rearend does a stock 96 ford bronco eddie bauer have.
How do you remove stock stereo from 1995 ford bronco Eddie Bour?
AS far as i know there is a special too; used to disengage the stero you can order it here www.installer.com/parts/index.html You can make the tool by bending two pieces of wire coat hanger into a "U" shape. To use the tool insert the pieces into the little holes next to your stereo and press outward, you should then be able to slide the stereo out of the dashboard.
How do you remove stock stereo 1995 ford bronco Eddie Bour?
Use the U-shaped radio removal tools. They are available from most auto parts stores. Once you get the tools, it should only take about two minutes to remove the radio. You insert the tools into the holes on the sides of the front of the radio, push them slightly outwards, and pull the radio out.
How do you remove the stock stereo on a 2001 Chevy Lumina?
Remove the decorative cover to your 2001 Chevy Lumina stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Remove the antenna cable.
How do you remove the stock stereo from a 1990 Mazda Protege?
screwdriver, and then pull hard enough to rip out the wires and then there you have it. the way to remove a stock stereo the theft version
Can someone post the diagram for a stock stereo on a 1987 bronco 2?
I got mine from here: http://www.installdr.com/Harnesses/Ford-Wiring.pdf
How do you remove a stereo from a Nissan Frontier?
send this question next week I will be replacing the stock stereo this weekend if weather permits
How do you remove stereo in f-150 2006?
Remove Stock Ford RadioCheck related link below
What does a 1991 ford bronco full-size Eddie Bauer edition weigh stock with a 5.8L V8 motor 4x4 empty?
The curb weight of a 1991 Ford Bronco Eddie Bauer edition with a 5.8 liter V8 motor is 4,430 pounds. This weight is when the vehicle is empty.
Mitsubishi eclipse no instrument lights?
i currently have the same prob...to my understanging the stock stereo runs along with the dash lighting, so did you remove the stock stereo? also check fuses on the driver kick panel
What is the correct tire size for a 1988 bronco?
Stock tires on the Bronco are 31x10.5 R15 with stock rims.
How do you remove the stock stereo of a 1989 Acura Integra?
You have to unscrew the center console and work your way up.
