0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you change pickup coil on a 1988 GMC 2500 pick up?
Remove Distributor,remove drive gear,remove shaft,remove pickup coil.
How do you remove 1986 Chrysler fifth avenue radio?
I would like to know how to remove the radio in a 1986 chrsyler 5th avenue
Where is the ignition control module on an 1994 s10 pickup located?
Remove the distributor cap and it will be bolted inside the distributor on the base plate.
How do you remove the pickup coil from a 1993 Chevrolet S10 4.3 6-cylinder?
remove the distributor cap remove the screws that attach the pick coil to the base of the distributor and replace in reverse order
Where is Ignition coil 96 Chrysler sebring?
The ignition coil is inside the distributor behind the cap. Remove the distributor cap screws, remove the cap and you will see the coil.
How to Remove the ignition coil on a 1996 Chrysler Sebring 2.5l?
It is part of the distributor and is not serviceable separately.
Where is the ignition coil located on a 1996 Chrysler Sebring jxi?
The ignition coil is inside the distributor behind the cap. Remove the distributor cap screws, remove the cap and you will see the coil
How do you change a pickup destributor?
you must remove the distributor, disassemble unit and replace pick up coil
How do you replace the ignition module on a 1976 Chevrolet Cheyenne?
The pickup coil in the distributor? !976 should be an HEI distributor. Take the cap off, unplug the wires going to the distributor, remove the rotor and the pickup coil is under the rotor and held in place with two screws.
How do you get to the front dash board speaker in a 1988 Chrysler Fifth Avenue?
You have to remove the whole dashboard and then the speaker should be exposed, then just remove it.
Where is the cam sensor on a 2004 chev pickup with 3.4 v6?
You will have to remove the Distributor Cap and it will be on the left side of the Dist. plate.
Where is the ignition control module located on an 89 Chevy 1500 pickup?
If you remove the distributor cap and rotor you will see it bolted to the plate and it will have electric wires pluged into it. It will be on the right side of the distributor.
