Remove electric window switch holder by pulling up on it. Remove screw next to door handle holding top of door panel. Remove red reflector plate mid-door and remove screw under it. Now you should be able to push up on bottom of door panel and panel should slide straight up doing this slowly so you can feed window switches through hole. Under anti-noise blanket, you will have to carefully peel away from dor, you will find bolts that hold mirror in place. Don't forget that you have electric wires going to it. You will need to disconnect the connector by door handle and feed the wires through the whole to get the morror off the truck. I did this on my 2003 F350 and had no problems except to remember to feed wiring slowly.
( 76.9 inches ) outside mirror to outside mirror , on the 2005 Ford GT
No, the 2003 Ford F350 rims will not fit on a 1999 Ford F350.
Mine is a small box attached to the rear view mirror
Yes, the rims off a 2002 Ford F350 will indeed fir on a 1999 Ford F350.
remove column dust covers, along with ignition switch. then remove retaining
Take it to Ford.
start by taking the tires off
I need a diagram of ford F350 drum brakes on 1996 model 460 engine 4 wheel drive
no changed in 2003
to remove a 6.8 v10 from a f350 2003 do you have to remove front end
Miles per gallon of Ford F350 is about 14.
* Remove the mirror trim cover from the door panel * Remove the three mirror retaining nuts and detach the mirror from the car