I believe it is located behind the glove compartment. Drop out the glove compartment box and you will see the blend door actuator.
the blower fan resistor is located in behind the glove compartment to the left of the blower motor. you have to remove glove compartment to get at resistor.
Remove the glove compartment and the fuse will be located behind it. A diagram of the fuse layout is stuck to the left side of the glove compartment.
you must first remove the glove box,then you will be able to get at the screws that hold the box in place
In my Ford Explorer , the glove compartment is in the dash , in front of the right front passenger , and has a door that can be opened
It is a pain in the neck. It is located under the dash behind the glove compartment and looks like a tiny radiator. Good luck.
open your glove compartment empty contents then pull down compartment, fuses and fuse board are behind glove compartment.
Yes, just remove the glove box, 5 or 6 small screws, turn sideways and wiggle it out.
on the right side of the truck, inside the door. underneath the glove compartment, there is a hole in the siding of the inside fo the truck, reach in and tahts where it is
in the engine compartment below the dashboard and behind the glove compartment
How do you remove and replace the battery on a 2001 Ford F150?
you should be able to get at heater core just by removing glove box.no need to remove all the dash Is there any instructions on how to do this?