on both sides of the radio u have 2 spring like clamps that hold it in. u have to somehow get all 4 pushed in to remove the radio out
They make a tool for this. the tool is 2 U shaped looking pieces of metal that are round. On the front side of the radio the are 4 holes you push the tools in forward which relieves the spring tesion and pull on the tools the radio slides out towards you. You can get the tool at any auto store for around $5.00.
How to remove the factory radio and disconnect wirring harnes in a 2004 f150 ford truck
there should be two holes, vertically, on each side of the radio, you can make a tool out of a coat hanger to stick into each side, when you have placed your homemade radio tool into the holes, simultaneously, you should be able to pull the factory radio out
by using the Ford radio removal horseshoe tools. Takes a couple of seconds.
You must buy a Ford Factory Stereo Removal Tool. then pull the radio forward and unplug the wiring in the back.
you will see 2 holes in each side of the radio, insert standard radio pins into these and the radio will pull out
you will see two holes in each side of the radio, insert standard radio pins in here and the radio will pull out
If you have the factory radio and there is a hole in each corner of the radio. You will have to buy a stero removel kit from the store. Walmart has them for around $6.00.
How do you remove the stuts rear from ford crown victoria 92?
The durelastic rod. its new. srry if i didnt spell durelastic right. hope you have fun with your ford(:
For a 1992 Ford Crown Victoria : ( it came from the factory with 5W-30 )
A 1992 Ford Crown Victoria came from the factory with ( 5W-30 )
pop off the plastic bezel around the radio and you can access the bolts - remove bolts on radio - you will have to unplug several harnesses before removing -and easy job