Wiki User
∙ 13y agoRemove visible screws and those behind plugs. The armrest probably removes as a separate piece and may have additional screws behind it. Pry off the electric lock knob from the linkage if so equipped. On a front door, remove the rear view mirror positioning knob from its housing by loosening the set screw in the bottom of the housing with a small Allen wrench. Pop loose the nylon fasteners around the bottom and sides. A special tool makes this easier, without tearing the shoulders of the fiberboard backing of the panel where the tab of the fastener fits. Once everything is free, lift the panel straight up. The wires to the window switch, if so equipped, may need to be disconnected from the back of a rear door or armrest of a front door.
Wiki User
∙ 13y agoThe intermittent power window module for your 1996 Chevy Lumina can be found inside of the driver door. You will need to remove the door panel in order to access the power window module.
Remove the inside door panel of your 1997 Chevy Lumina. Remove the linkage to the window crank. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
Remove the inside door panel. Remove the window clips that hold the window onto the track. The window will come out. Reverse the process to install the new window.
How to remove steering wheel on Chevy lumina 2000
Sorry But You Will Have To Remove The Fuel Tank
The 1993 Chevy Lumina 3.1 liter engine timing belt can be found on the front of the engine. You will need to remove the front engine cover in order to access the timing belt.
Remove the decorative cover to your 2001 Chevy Lumina stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Remove the antenna cable.
The Chevy Lumina dashboard is held in place with retaining bolts and retaining clips. Remove the retaining bolts and pry outward on the retaining clips.
You will need to remove the retaining ring at the top of your 1998 Chevy Lumina ignition switch. Slide the ignition switch out. Remove the wiring harness.
under the right rear window trim.
Begin by removing the tire and wheel from your 2000 Chevy Lumina. Remove the brake spring and the break caliper. The rear brakes will come off.
Drain the oil from your 1996 Chevy Lumina oil pan. Remove the oil pan retaining bolts. The oil pan will come off.