We could write a book on the correct procedure to remove the dashboard in a Camaro. There are far too many things to do, and not do when removing it. Also, "words" are useless, in some areas, and pictures are needed to illustrate the words. Go to your local auto parts store and pick up a Haynes manual or Chilton manual. These are filled with "how to" with pictures and illustrations to guide you on how to perform these tasks. Short on cash? Most libraries have a plethora of books and the manuals I indicated in their "resource" section.
It will be best for you to buy a Haynes Manual at a parts house or bookstore. It will give you full details and pictures. They have them that are specific to your car so you are not buying information on something you do not need.
There is no such thing.
camaro* and its under the passenger side dashboard. you have to take the entire dash apart to get to it
It would be best for you to buy a Haynes Manual as it will have everything you will need to do the repair.
It has no Governor. Speed is computer controlled.
Instructions1 Open the Camaro's hood. Make sure the engine is off and remove the black terminal from the battery with a wrench.2 Remove the two screws under the steering wheel with a Phillips screwdriver.3 Remove the two screws on the far left of the steering wheel on the side of the dashboard. Remove the two screws on the far right of the dashboard, to the right of the glove compartment.4 Open the glove compartment and remove the two screws at the back of the compartment. Pull the glove compartment off the dashboard.5 Remove the four screws from the corners of the center dash panel. Remove the screws along the edge of the dashboard, close to the windshield. Once all of the screws are removed, pull up on the dashboard to remove it from the Camaro.Tips & WarningsIf you are having a difficult time removing the dashboard from the Camaro after removing the screws, use a flat-head screwdriver to assist you in prying it off the Camaro.Be careful not to break the dashboard when pulling it off.
you have to take out the whole dashboard
I call a mechanic, someone who wouldn't ask the internet how to do it
The 1994 Honda Camry dashboard is held in place by 12 retaining clips. Pry outward on each retaining clip. The dashboard will come off in three pieces. Reverse the process to install the new dashboard.
You remove and install the engine from the top.
The 1994 Chevrolet Blazer S-10 dashboard is held in place with eight retaining bolts and eight retaining clips. Remove the retaining bolts and pry outward on the retaining clips.
Fuse, loose connection, or the light switch. how do you remove the dashboard on a 94 mercury grand marque?