Use the link below! Save you hundreds of bucks at a local shop versus the dealer! Had mine done on Mon using a set of $10 pins from AdvanceAuto! 2 hrs tops with a good mechanic and cherry picker! Ford won't sell you the pins and only the whole hinge assy. The lower set can be purchased on EBay or Witty deals if the roller is needed as well. http://www.lincolnsonline.com/tech/00045.html
it is in the trunk on the driver side by the hinge
Open the door, support it with a jack, remove the hinge spring. To remove the pin, you should have to remove a retaining clip at the head of the pin and then tap it out with a hammer. The upper hinge has two bolt secured bushings. Unthread the bolts, tap them out with a hammer and pull out the bushings. Make sure the door is held secure, as it will be free floating at this point.
You need to remove the panels in the trunk to get at the top of the gas tank, then you can easily remove the pump and install the new one.
How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?
Remove the instrument panel cover. Remove the tachometer retaining screws. Remove the tachometer cable from the back of the tachometer. Reverse the process to install the new tachometer.
To repair a broken door hinge on a 1991 Cherokee Briarwood, a new piece of metal should be welded in to hold the hinge. Then, a new hinge should also be welded in that is aligned with the door pin.
call a locksmith
How to remove ignition switch on a 91 Mazda Navajo
what is a gas sensor never heard of one is it like a muffler bearing?
Disconnect the 1991 Regal battery. Remove the alternator belt and wiring. Unbolt the alternator and install the new one. Reconnect the wires, install the belt, then reconnect the battery.
on a 91 Lincoln town car the keyless entry code is in the trunk on passanger side on the hinge part Yes and it should be in the owners manual or it should at least tell you in the owners manual where other stickers are
find the wires and do one at a time as too not cross wires with different plugs