It is funny because I just did this last night. On the side of the accumulator that goes to the hose there is a nut that turns. If your accumulator screws right onto the coil at the firewall, you have to turn the whole accumulator as there is not an actual nut to turn. There are two nuts and a bolt to remove the brace. Make sure to disconnect your battery first as you will come close to the fuse block on the fire wall. Hope this helps.
On the accumulator.
you sell the truck
cut seals and gently remove
remove the bed of the truck.....
me and my buddy have that problem we just beat on the dash he has a 98 Chevy truck and if that don't work keep beating on the dash above and around the radio and on the redio its self
How do you change a flywheel on a Chevy truck? You can remove either the engine or the trans. Once you have either removed just remove the bolts holding the flywheel in place.
First, get a truck then roll the truck over the lander. .
If your asking this question you shouldn't be working on your truck.
Remove the fuel tank or remove the bed.
Unbolt it from the floor.
you get a towel and clean
door open from inside or outside