Remove the 1992 Dodge Dakota inside door panel. The door handle mechanism will be visible. Remove the door handle linkage. Remove the door handle retaining bolts.
pull the inner door panel off and remove the clips holding it in.
Remove the inside door panel from your 1996 Dodge Avenger. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install your new door handle.
You have to pull it out.
First remove the door panelRemove the moisture barrier.Disconnect the rods from the handle inside the door.Next remove the two bolts holding the handle on.
First remove the door panelRemove the moisture barrier.Disconnect the rods from the handle inside the door.Next remove the two bolts holding the handle on.
there are 2 torque bolts, one behind the handle and one behind the other handle where you open the door then there should be about 3 screws (phillips) two on the bottom and one up near the mirror mover
You have to take off the inter door panel and on the inside there is a black plastic nut holding it in placet. Unscrew this and the door handle will come off after disconnecting the two latches. There is a u shaped clip that holds the lock in place.
i have the same problem on my 95 Dakota i had to undo the window regulator and move the glass forward to get access to the rod that connects the latch to the door handle it fell off i am still working on it but that's a start for you
Click on the link to your right for instructions.
Remove the inside door panel. Remove the door handle linkage. Remove the door handle retaining bolts. The front door handle will come off.
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.