a 6 INCH.
Look at your harmonic balancer the 1 on the 350 is bigger than the 1 on the 327.
To remove the harmonic balancer from a Nissan Maxima, first you need to removed the center bolt. After that, you can use a puller to remove the harmonic balancer. Before you do this, make sure you disconnect the battery and remove the drive belts.
On most newer cars, the crank pulley is one piece with the harmonic balancer.... Remove it with a harmonic balancer puller.
The harmonic balancer tool is made especially to remove the balancer. Some stores will loan you the tool with a deposit.
use a harmonic puller
Go to Autozone and tell them u need a harmonic balancer puller
To remove the harmonic balancer on a 1998 Saturn SL2, you will need to use a harmonic balancer puller tool. First, remove any surrounding components that may impede access. Then, attach the puller to the balancer and use a wrench to slowly tighten the puller until the balancer comes off.
Remove upper core support, remove radiator, remove belts, using a hormonic balancer puller(specific for chrysler) remove balancer.
The flywheel has to be held in place by a holding tool, Remove the mounting bolt, then use a balancer remover to pull the harmonic balancer.
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
You need a balancer puller to remove it , It don't just slide off.