A person can remove the front license plate cover on a 1990 Corvette with a screwdriver. The plate can then be replaced with a custom plate or a state plate if required.
Lay down on the ground in front of the cover,look between the cover and the bumper and you'll see two Phillips head screws.remove them and your cover will be off.I just did this.
The 1990 Chevy Corvette front drivers side speaker cover will need to be removed. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker.
There are two screws on the bottom of the cover. You should have just enough room to fit a screwdriver in between the nose of the car and the cover without scratching the paint. It might be tight, but the cover should give enough for you to get tools in there.
Are there people that use the front license plate still? lol Well taking them off if you are using them is quite easy, get a screwdriver and take the bolts out. Now if you have a custom plate holder you can get a detailed answer by visiting smokinvette.com. Good luck!
FYI I have an 84 vette and the front end is now worth a fortune as I never popped out the front plate section and left it original - there are under 300 left with original front end. Food for thought if you plan to keep the car long term.
== ==
== ==
Remove the front cover of your 1979 Chevy Corvette radio. Remove the radio retaining screws. Slide the radio out. Remove the wiring harness and the antenna cable from the back of the radio. Reverse the process to install the new radio.
== == == == you don't it's molded int to the bumper.
== ==
The 1992 Chevy Corvette front speaker covers are held in place with two retaining screws. Remove the retaining screws and the speaker covers will come off.