1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver's continue to hold down until instructed
to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the key to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the vehicle locks and unlocks.
This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode
how do you program your keyless remote for 2003 Chevy blazer
How program my keyless entry remotes for 2003 chevy malibu
Look in your owners manual for the directions.
where is the fuse for heated driver seat on 2003 Chevy Silverado>
can soneone help me? i lost all my remote keyless entry for my 2003 Chevy express van and i just got a new repacement. but i don't know how to program it.. can soneone help?
how do you change the knock sensor in a 2003 Chevy silverado 5.3
a 2003 Chevy silverado taillight bulb uses a 3157
How do you un lock a raido on a 2003 chevy silverado
YES
No, Chevy changed the wiring harness in 2003. and the way it is mounted, it can be made to work though.
Will a 2000 chevy 2500 bumper fit a 2005 chevy 2500
NO there is not. CHEVY did not use them on there trucks.