You can get a wiring kit at most auto parts store for your year of van.you need to take the the rear tail lights out and just unplug and plug in the new wires leads and hide a few wires under the trim. I did mine and was real easy.wire kit has step by step so it was no problem.guess it took me around a hour to do it.Got mine at autozone.
Not all trucks are built with a trailer harness plug. If you can not find one, then your truck does not have one and you need to install one.
you do not need the extra 7 pin if your not running electri brakes
2006 Dodge Dakota - Where do i find the trailer wiring harness
Have you looked under the vehicle? I'd be surprised if the wiring harness wasn't already there and taped up under the vehicle. Barring that, most business that sell and install trailer hitches will also install trailer wiring harnesses. If you're a DIY, go to the local auto parts store and ask. They probably have the wiring harness you need all setup to plug into the manufacturer's wiring harness.
U-Haul sells a kit with instructions
You can find a trailer wiring harness for a Chevrolet in a Haynes repair manual. The manuals are available at most auto parts stores.
It wouldn't be impossible, but you will need to also replace the wiring harness that goes with it.
Your local auto parts store can sell you a trailer wire harness for that vehicle that simply plugs in to the original harness and it is weather tight. It installs in minutes.
* Purchase a compatible radio (aka head-unit)* Purchase the Windstar compatible wiring harness kit ($10 or less)* Remove and unplug current radio* install wiring harness per included instructions* connect wiring connections and antenna lead* insert radio until it clicks.See "Related Questions" below for lots more detailed information
The way to plug in the harness depends on the type of harness that you have. Some are designed to unplug a connector then insert the harness inline with the wiring. Some require a special connector that clamps on the side of the wires, while others require wires to be cut and spliced together.
Check with your local auto parts store, they can sell you a trailer harness that simply plugs into your existing harness, very easy to do, just follow instructions. The harness should be in the $25 range.
very easy .I bought my wires on eBay ,,,the trailer harness plugs right into your lights no cutting at all