Remove negative cable from battery Disconnect positive cable from starter and ignition wire Loosen mounting bolts from starter Remove starter Install new starter in reverse order of removal
Disconnec battery Starter is located under car where engine meets tranny, remove the electric connectors Remove starter mounting bolts Install new starter in reverse order of removal
since no one on here helped me I decided I'd throw in a starter. Turns out that was the problem, along with a vacuum leak.
Get some tool's and pull it out install new starter!
To install a 2000 Yamaha Waverunner XL 1200 starter, first remove the 2 bolts. Then the wires connected to the starter. Remove the starter and replace with new.
put new plugs and wirers...JAC
take the old one out and put the new one in
Begin by removing the positive cable from your 1993 Chevy Corsica battery. Remove the cables on the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
Remove the positive cable from your 1995 Nissan Pathfinder battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Remove the starter cables. Remove the retaining bolts. The starter will come off. Reverse the process to install the new starter.
Remove the cables from the starter. Remove the three retaining bolts from the starter. The starter will come out. Reverse the process to install the new starter.
Remove the battery cables from the starter. Remove the retaining bolts from the starter. The starter will come off. Reverse the process to install the new starter.