answersLogoWhite

0


Best Answer

This is the pull out switch. Disconnect the battery pos. side is good. Then remove the panel under the lights, under and behind the pull out switch, you will feel the back side of the switch, disconnect the wire harness. There is a little button to press as you pull the switch all the way out, find that little button and press it. The switch will then come all the way out. Remove the old switch, small nut on the outside to remove, then it just pop's out. Install the new, and just push the rod in, it will lock by itself. Connect battery and check it out.

User Avatar

Wiki User

βˆ™ 15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you install headlight switch on 1988 topaz?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you change a 1988 Cadillac sedan deville headlight switch connector?

how do you take out a headlight switch's in a 1998 cadillac deville?


How do you install key ingition switch 1988 Chevy S-10?

how do install key ignition switch 1988 Chevy s10


How do you remove the headlight switch 1988 caddy eldoroado?

In order to remove the headlight switch of a 1988 Cadillac Eldorado, you must first disconnect the negative cable from the battery and allow time for the capacitors to discharge. Unscrew the headlight switch, remove the wire plugs, and remove the switch itself. Insert a new switch and replace the wire plugs and screws. Reconnect the negative cable and test the new switch.


How hard is it to change your the headlight switch in a 1988 ford Escort?

it is not that hard you can get a book online if you need help


How do you install a switch interruptor commutateur for a 1988 Cadillac deville?

What is location of switch interrupter on 2001 Cadillac deville


Is the radio the same in a Topaz as it is in a Tempo 1988 Topaz?

Should be. Just take a look at them both.........


How do you fix a 1988 Oldsmobile cutlass supreme dashboard lights that want stay on?

Replace headlight switch- dimming rheostat may be loose


In an 1988 Acura Legend why when you turn the headlights on the rear lights are off and vice versa if also the rear lights come on when braking?

My legend had that when i first got it its a bad headlight switch i suggest going to the junkyard and pull a new one costs arounf $35 and install it problem solved i.e. bad terminal in switch


How do you replace the headlight switch in a 1988 Ford F-150?

First remove the wiper and headlight switch knobs. They will pull off with force, then you will under stand how they go back on. Remove cover under dash to view fuses. Take two screw out that hold the fuse panel. The dash cover around the wiper and headlight switch actually pops off when pryed on. Once this cover is off remove the nut around the headlight switch and it will pull out, but you need to get the fuse panel out of the way. The switch it self has a pull out bar that can also be taken out by depressing the button brad on the switch itself.


Your 1988 Volkswagen Cabriolet headlights quit working you have checked the headlight bulbs and fuses for the headlight circuit and are ok What are other possibilities and how to do?

It is possibly a switch problem. If you can get to the switch, put a jumper wire to the two contact points (hot side and ground) with the key on the lights should come on and then you know the problem is the switch. psg


If all the lights except the headlights come on for a 1988 Ford Ranger 2.3 4-cyl what could be wrong?

More than likely it is the headlight dimmer switch.All headlight operations go through it once you have turned them on at the switch. It can be the relay.


Is there a simple way to change the headlight switch on a 1988 topaz with ac The fuse panel is blocking your way to the switch Is there another path?

No, there is nothing simple here. Just small hands, dis-connect the battery, and remove the panel where the head light switch is. When you reach underneath from behind, right on the switch, there is a little spring like button, when you press this the head light pull rod will come out. Now you can remove the switch, unplug the power supply, and replace the switch. When all that is done, just insert the head light rod, push it in and it will lock. Replace panel. Not really much space to work in. Good luck.