0
Hi there.
i own a 1989 Chevy cheyane and had to fix my tilt steering. the same applies to removing the steering wheel and etc to get to the ignition switch as well.
i went to Canadian tire or parts dealer. i had to rent a steering wheel puller etc. remove steering wheel cap, undo main bolt. remove plastic horn cover ( watch out for springs) remove tilt arm. then you have to remove torx screws from base of tilt housing. slide off main collar. you can search on the web for removing or fixing tilt mechanism and it will show you how to do this but it will show you how to remove the ignition system as well. it's not to hard just keep all the parts together and reasemble in same order you took apart. It took me two hours to do this, and i didnt know what i was doing.
good luck.
chris
Add your answer:
Earn +20 pts
Wiring diagram for ignition switch for 1974 Chevy truck?
Ignition wiring diagram
How do remove the ignition switch on 1978 Chevy truck?
High-powered explosives.
How do you install lock cylinder in 1986 Chevy truck?
Ignition Lock? or Door Lock?
How do you remove the ignition switch cylinder to replace it on a 1971 Chevy truck with no key?
With no key you will have to drill out the existing tumbler assembly from the switch in order to unscrew the ignition switch bezel.
How do you install a kill switch in a 81 Chevy truck?
Just put a switch in the power wire going to the coil.
Install brake switch 2500 Chevy Pu?
where location of brake light switch on 1989 chev, truck.
Will a bad ignition switch shut down the electrical system on a 1994 Chevy truck?
A bad ignition switch can shut down a vehicle's electrical system. Ignition switches have been the cause of a major recall by General Motors.
How do you install ignition switch 1988 gmc truck?
You need to remove the steering wheel first with a puller. There is a latch you can trip with a small screwdriver that will let the ignition switch slide out. Simply replace the switch and put the steering wheel back on.
How do you install front drum brakes on 70 Chevy truck?
Does the truck have stock discs? Why would you want to switch the discs back to drums? Does the truck have stock discs? Why would you want to switch the discs back to drums?
How do you remove and repair replace an ignition switch in 1996 1500 series Chevy truck that sticks in the off position?
call a lock smith .
Can a Chevy truck with a 5.7 engine with a tbi cause detonation and pre-ignition?
can a chevy truck with a 350 engine with a tbi cause detonation and pre- ignition?
How doi remove ignition without key from 1986 Toyota pickup truck?
Begin by removing the retaining ring at the top of your 1986 Toyota pickup truck ignition switch. The ignition switch will slide out. Remove the wiring harness from the back of the ignition switch.
