buy some radiator flush from the local auto parts store. the instructions will be on the bottle. basically drain the radiator, refill with water, add the flushing agent, run the vehicle with the heater on high for 10 minutes, drain again and flush the system until all the water runs clear when you open the petcock. close it up and refill with the proper amount of 50/50 mixture of recommended coolant.
How do you flush the raditor on a 1992 GMC Sonoma Pickup.
Remove The Radiator And Have A Radiator Shop Test, And Flush It.
is there a drain plug on the radiator
Just flushing the radiator, no but to flush the system, yes.
r 12 its no longer available so a conversion kit and system flush are needed. $100
Depends on where you go.
If you do not have a radiator cap once you drain the radiator, you can use several options to flush the cooling system. You can easily do this by filling up the system with as much water as you can and then warm it up.Ê
Remove the coolant from your 1997 Chevy Malibu radiator. Remove the bottom radiator hose. Run water through the top of the radiator allowing it to run out the bottom.
Buy a new car its a pos
Remove the bottom radiator hose from your 1995 Chevy Lumina radiator. Put a water hose in the top of the radiator. Allow the water hose to run. Keep the water running until clear water runs out of the bottom of the radiator.
Buy as flush kit at auto parts comes with fittings and instructions
Remove the bottom hose from your 1995 Chevy Corvette radiator. Allow the coolant to drain out. Put a hose into the top of the radiator. Run water through the radiator until it runs clear.