answersLogoWhite

0


Best Answer

First raise the hood.Removing the top engine mount gives easier access.Jack the car up on the right side,remove the right front tire,remove the inter fender at the quick release fasteners.The original tensioner can be rolled back with a 9/16" wrench,then remove the belt.Take the top bolt for the tensioner from under the hood with a 10mm boxed end wrench,then you can remove the bottom bolt threw the wheel opening with the same tool or you can use a ratchet and socket.Then replace the parts you have removed Replacing the belt can be done by you self, but having help makes it a lot easier.

1979 Saturn SL2, alternator, replace, these directions apply for getting to the alternator on the 1979 SL2.

YOU CAN NOT CAN NOT REMOVE THAT MOUNT WITHOUT SUPPORTING THE ENGINE

accutally you can remove the top engine mount without supporting the engine because the motor will only drop 2 inches before the lower engine support cradle sits on the subframe. will putting a jack under the engine help you to line it all back up when your done... yes, but not necessary

that a good way to put nonsense strain on your other mounts, keep in mind that most of them are dog bone style and also putting strain on eletrical .... smarter not harder

yes, dogbone mounts that will swing,and if any extra strain is put on them its only for at most 10 min. no harm is done to the electrical being that there is really no electrical on the pully side of the engine. a 2" drop on the pully side isn't going to harm any electrical on the trans side of the motor. i do 4-5 of these tensioners a week this way and have never had a problem

User Avatar

Wiki User

βˆ™ 13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you fix a fan belt tensioner on a 95 Saturn SL1?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Picture of fan belt tensioner on vectra?

picture of fan belt tensioner on a vectra


What happens if 1999 Saturn sl1 fan belt breaks?

There is no Fan belt. There is a serpentine belt however. If this breaks do NOT run the car. This belt turns the water pump keeping your engine cool. You will have major issues if the engine overheats.


Is the radiator fan on a 2001 Saturn sl1 a push or pull fan?

PULL


How do you tighten a fan belt on a 1998 dodge caravan 3.3L?

The fan is electric, not belt driven. The serpentine belt is has a spring loaded tensioner. If the belt is loose, the tensioner has failed.


How do you tighten fan belt rover 214?

You can tighten a fan belt by tightening the tensioner pulley. Pry to the left on the tensioner pulley and tighten it.


Belt squeal on a 1995 Saturn SL1 when you run the AC or Heater?

The squeal when you turn on the AC or heater is a loose fan belt. It may be cracked and need replaced, or it may just need tightened.


How do you install fan belt on 1997 ford ranger 3.0 v6?

Loosen the tensioner pulley. Put the fan belt around the pulleys. Pry the tensioner pulley to the right until the belt is tight. Tighten the tensioner pulley nut.


If the engine coolant sensor andconnector were replaced on a 1999 Saturn sl1 why is the fan motor not working?

bad fan or bad fan relay


Is the fan belt tensioner on a 95 Saturn sl2 self adjusting cos you cant get mine to stay tight?

Yes, it is self adjusting, your's must be bad.


How do you tighten the fan belt on a 1998 Hyundai Elantra 1.8?

with the automatic belt tensioner..


How do you tighten the fan belt on a Chevy Silverado?

If it is a serpentine belt you replace the tensioner pulley


Changing the fan belt on a Nissan z24 4cilnder pick up?

first u must loosen bolt on power steering belt tensioner till the belt will come off ,then loosen alternator bolts and push alternater till belt is loose enough,then take fan belt off ,install new fan belt,use crowbar on alternator to tighten fan belt,then put power steering belt back on and tighten tensioner till its at spec. then retighteh tensioner center bolt.