0
That is a MAP sensor code, check to see if the sensor is returning at least .5 volts, if not check for 5 volt reference voltage on the connector.
If you have voltage going in, and none or less coming back out replace the sensor, if no reference voltage check the connectors, wiggle them and monitor the voltage.
If the wiggle test checks out, draw a vacuum on the MAP sensor vacuum port. As you add vacuum the voltage should decrease. With no vacuum, the MAP sensor should read around 4.5 volts. If there is no change in MAP sensor reading on the scan tool, replace MAP sensor.
Add your answer:
Earn +20 pts
What is the code p0107 on 1998 S70 GLT?
Trouble code P0107 means: Manifold absolute pressure or barometric pressure circuit low input
What is the paint color called and what is the paint code for a green 1998 jeep wrangler tj Sahara model?
There were 2 "green" colors for a Jeep TJ in 1998: Moss Green Pearlcoat (code RJN) and Bright Jade Satin Glow (code SQP).
What does dignostic code 123 mean for a Jeep Wrangler x 2004?
If you are getting a p0123 code on a Jeep Wrangler, it means that your throttle body sensor is not working properly. Once you replace this sensor, the code will go away and your Jeep?æwill run smoother.
What is the paint color for a 1988 green jeep wrangler Sahara?
The paint code for a 1988 Jeep Wrangler Sahara is PJ5 it is also called yellowish green.
What does code P0107 mean in a 98 Oldsmobile intrigue?
Trouble code P0107 means: Manifold absolute pressure or barometric pressure circuit low input
What is meaning of 2000 Toyota Echo trouble code P0107?
Trouble code P0107 means: Manifold Absolute Pressure/BARO Sensor Low Input
What is a Jeep wrangler tj se?
Tj was the body code from 1997-2006.
What does the code P0107 on a Mistubi Diamante 2001 LS stand for?
Trouble code P0107 means: Manifold absolute pressure or barometric pressure circuit low input
What does code p0340 mean on a 2005 Jeep Wrangler?
Camshaft sensor signal malfunction.
What is trouble code 33 on 1995 jeep wrangler?
Air conditioning clutch relay.
How do you reset abs on Jeep Wrangler?
You have to fix the cause of the code that turned the light on. You will need a scanner to read the code.
How to Reset check engine light in Jeep Wrangler?
After fixing the cause of the trouble code, you clear code with a scan tool.
