To endure that the ONLY gas in the system is refrigerant.
The condenser in a refrigeration system is responsible for releasing heat absorbed from the refrigerant vapor during the cooling process. It changes the refrigerant from a vapor to a liquid state by transferring the heat to the surrounding environment, typically through the use of air or water. This process allows the refrigerant to release its stored heat and cool down before returning to the evaporator to start the cycle again.
In the modern refrigeration cycle, the compressor plays a crucial role by compressing the refrigerant gas, increasing its temperature and pressure. This high-pressure gas is then condensed into a liquid before entering the expansion valve. The compressor helps maintain the flow of the refrigerant throughout the system, enabling the cycle to remove heat from the space being cooled.
FLASH GAS - Instantaneous evaporation of some liquid refrigerant at the metering device due to pressure drop which cools the remaining liquid refrigerant to desired evaporation temperature.This flash gas cannot absorb any heat having a negative effect on the net refrigeration cycle
A refrigerator compressor is the center of the refrigeration cycle. It works as a pump to control the circulation of the refrigerant, and it adds pressure to the refrigerant, heating it up. The compressor also draws vapor away from the evaporator to maintain a lower pressure and lower temperature before sending it to the condenser.
at the metering device before the evaporator
Subcooling the liquid refrigerant before it leaves the condenser helps to increase the refrigeration system's efficiency by ensuring that the refrigerant is in a completely liquid state. This can improve the system's cooling capacity and reduce the risk of compressor damage due to the presence of any vapor in the system.
If you are going to purge the system using nitrogen, rather than evacuating the system with a vacuum pump, you will first need to remove the refrigerant gas without releasing it to the atmosphere.
The refrigerant which was in the form of gas before entering the condenser, condenses (converts to liquid refrigerant) as a result of the gas being compressed. This condensation will release heat which is partly taken away by the function of the fan (the rotating blades) in order to prevent the compressor from overheating.
True refrigeration is a very popular company with great customer service. The best way to determine if they are worth the price for you would be to look over your budget and look over product reviews before you make a decision.
No
right before the compressor