2.2L OHV Engines * Drain coolant (about 1 gallon) from the radiator until its below the thermostat housing * Disconnect the radiator hose from the thermostat cover * Remove the bolts and lift the cover off you mat have to tap the cover with a soft-face hammer to loosen it * Not how its installed then remove the thermostat 2.3L and 2.4L OHC Engines * Drain the coolant from the radiator * Remove the exhaust manifold heat shield * Remove the cover that protects the outlet pipe on the thermostat housing by accessing cover bolts through the exhaust manifold runners * Raise and secure the car on jackstands * Disconnect the radiator hose from the metal outlet pipe * Remove the outlet pipe bolt and carefully separate the outlet pipe from the thermostat housing and the engine block * Note how its installed then remove the thermostat from the outlet pipe
Thermostat is the whole water outlet on the waterpump.
There is no speedo cable on a Sunfire.
You can not.
for one you need to loosen your lug nuts before you jack up the car,
The thermostat is located near the intake on a 1999 Pontiac Grand Am GT. The thermostat can be located by following the upper radiator hose directly to the thermostat.
hell no
What is the firing order for a 1999 Pontiac sunfire 2.2L 4cyl Engine?
Yes
pontiac350enginebuild.blog.friendster.com/
.040
the 2.2 ecotec runs @ 195. i suspect the older motor is the same. or for sure you can just call your local parts store and the clerk can look that up for you.
M12 1.5mm