1st open the trunk your going to need the appropriate rachet and size. I think about a 10mm should do it. Once you open the trunk, look on the back on the part that lifts up. Now unscrew the bolts to the corresponding side. You may need a flat head screwdriver to pop off the lighting assembly cover. Once you unscrew everything you should notice a black cord that's the power cord for the lights. You should be able to pull off the entire assembly. Then pop in or out the bulb you need. Installation is the reserve of removal. Hope that helps
Source:Chilton Repair Manual, 5yr owner of a 1998 Buick LeSabre/personal experience
I think the light assembly screws out from the inside of the trunk.
Where does the camsensor go on a 1997 buick lesabre
how do you replace the fuel pump on a 1997 buick lesabre
hi my car is leaking from the water pump so what can i do to stop leak ? and if i need to change the water pump would you guys tell me how can i change it?my car is 1997 Buick LeSabre v6 engine
The P0336 fault code on 1997 Buick Lesabre is a fault in the crankshaft position sensor circuit.
probably. go for it.
The 1997 Buick LeSabre is a mid-sized four door sedan. The vehicle retails for about 1000 dollars to about 6000 dollars depending on condition.
two wrenches flat screwdriver and pliers
1997, 98 and 99 lesabres are supposed to bigger inside so check with a dealer or wrecking yard.
118 ft lbs 1997-2004 Buick LeSabre
5.25"
4