Open the rear liftgate. On the inner edge of each tail light assembly you will find two screws. Remove the two screws.
Now grasp the plastic tail light assembly firmly, and pull it strongly backwards. It is held in place with three spring-loaded clamps. Once the clamps release, it will pop out.
There are two lamp harnesses attached to the tail light assembly - one for the reverse lamp, and one for the running/brake/turn signal lamp. To remove either lamp harness from the tail light assembly, turn the harness 1/4 turn counter-clockwise, then gently pull it out of the assembly.
The light bulb can be easily pulled from its socket in the lamp harness once removed from the assembly.
Installation is reverse of removal.
how do i change a parking light bulb on a 2003 hyunadi accent
change the light bulb,
I found the basic answer here on Wiki Answers, but after actually doing the work and taking some photos, I created a website that you really help. http://www.bobspchelp.com/help/auto/Ford/Expedition/2003/TailLightBulbs.htm
how do you change a front turnsignal lightbulb on a 2003 monti Carlo
My o/s parking lamp will not light, but, the indicator light is on instead, where do i change the bulb and how do i do this? BMW x5 2003
Not to be unkind - but READ THE MANUAL.
Check your owners manual. If you don't have one copy & paste this link. http://www.genuineservice.com/genuineservice/en/gloveboxresults
fold the mirror back and you will see a screw to remove it is a torx type screw on my Expy
If I recall correctly. It should be a peanut light bulb. And if it is a peanut bulb they just pull straight out.
how do you replace the fog light bulb on a 2003 ford explorer.
Remove the 2 bolts on either side of the lens which covers the bulb. Pull the bulb out of it's socket.
For a 2003 Ford Expedition, the reverse light bulb type is 3156. It is a standard 12-volt bulb that is commonly available at auto parts stores. Make sure to check your owner's manual or consult with a professional to ensure compatibility before making a purchase.