Start by removing the front wheels. Once the wheels are off you will see the rotors and caliper on the front of the strut. Take a socket and rachet and remove the two bolts one on the top and one at the bottom of the caliper. I believe they are 9MM hex bit. Pull the caliper off and the brakes will come with it. Remove the old pads and use a C clamp or C vise grip to push back the brake cylinder. Install the new pads making sure they are on correctly.(The easiest way to know this is to just remember how the old ones came off.) Reinstall the caliper on the rotor.(If it doesnt go on the brake cylinder is not back far enough.) reinstall the two bolts, double checking to be sure they are tight. Reinstall the front wheel and torque the lug nuts.
You have to drop the subframe
its on the front of the engine
Circum
The sensor is located near the front of the engine
no because the impala has a front valance panel and the cadillac does not
92-97 Seville
i would say only other eldorado's because they were front wheel drive v8's...
SHould be under the passenger side front seat
remove the right front wheel, then you can see it, tough to get at.
No. depending on your model, it fits 1997-1999 deville, 1995-2002 eldorado, or 1992-1997 seville.
How do you change the front brakes on a Ford Escort- ZX2 model, 2002 model
There are no emergency brakes on the front wheels of vehicles.