start by loosing the lug nut on the wheel then jack the car up take off the wheel take the caliper loose with a 10mm Allen wrench then with a 12mm socket wrench take the line loose from the caliper sorry but make sure you have a drain bucket to catch the fluid to replace it reverse it and put on the new brakes and to bleed it loosing the bleeder valve which is a 10mm wrench and let it drain till it come out steady no bubbles then tighten every thing up put the wheel on and then pump the breaks up before you move the car good luck
Yes the engine from a 2004 will fit a 1999 body.
no you cannot use it in 2004 Oldsmobile alero
The fuel filter can be found in the rear of the vehicle on a 2004 Oldsmobile Alero. The filter is located directly under the trunk area.
The final year for production for the Oldsmobile Alero was 2004. The exact weight of the General Motors vehicle depends on year and option groups. The 2004 Alero had a curb weight of 2996-pounds.
VERY CAREFULLY !
Oldsmobile stopped making Alero in 2004 and GM stopped making Oldsmobile in 2004, so some mistake here?
I get about 27mpg combined highway and city with my 2004 Alero
The Oldsmobile Alero was produced between 1999 and 2004. The compact car was manufactured in Lansing, Michigan, and was Oldsmobile's last vehicle sold under the brand.
http://www.devicemanuals.com/guide/Automobile/Oldsmobile/Oldsmobile-Alero-Owner%27s-Manual-2004-==TVRFd016QTM=.HTML you can download it there. that's where i got mine
The 2004 Oldsmobile radiator is located behind the front grill. The radiator will be in the front of the engine compartment.
how do you reset change the oil light in a 2004 alero?
The 2004 Oldsmobile Alero is safe for E10 ethanol-gasoline blends. It is not approved for E15 or E85, and those blends must not be used in this vehicle.