This procedure for removal is ineffective.. It does not show how the red exterior lense can be remove to expose the light brake socket for removal of the lamp.
You cannot twis the bulb assembly and pull in a Lincoln Continental 2000.
The access to the light bulb is to remove the exterior lense. Perhaps a refinement on how to will many on how to replace brake lighs.
remove the trunk lining or bend it back easy where the brake light is to access it and change it out.
You have to remove the trunk liner from the rear of the car,and then remove the three bolts that hold the taillight into place.
Where is abs fuse at
3157 - See sources and related links for picture, specifications and 1999 Lincoln Continental full light bulb list.
its a speed sensor. about 95$ plus labor
1998 Lincoln Continental brake light bulb replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
You can not just change the bulb. You need the whole clock
pop the trunk and right behind where the lights are pull the carpet down and their will be either light sockets that twist and pull,or there will be plastic nuts,just unscrew and take the lens off
If you mean the brake light, you just have to change the bulb or bulbs.
Some are accessable from the trunk. If not, take the light assy off.
A problem has been detected with the Anti-lock Brake System It could be a fuse , a sensor , or some other problem As long as the red " BRAKE " light in your dash is not on you still have " normal " brakes
what do you have to do to change the center brake light