The hvac switch is part of an assembly that has the on/off fan speed, temperature control, selector switches and rear window defroster all combined. To replace the blower switch will require replacement of the complete assembly since it is all made as one unit. To remove the switch, first remove the front wood grain panel around the radio and switch assemblies. It has six holders, three on each side of the panel. It is best to start at the bottom with a small flat pry bar and then work up toward the top of the cover. This cover is plastic and can easily break, so be gentle when prying it off. When you have the panel pulled out, remove the two cables from the back of the switch assembly and the whole thing should be free. The hvac switch assemby is held to the wood grain panel with six 4mm screws.
A 2005 Chrysler Sebring does not have a reset switch.
A Chrysler Sebring does not have a reset switch.
There is no such part on a Chrysler Sebring.
A Chrysler Sebring does not have a kill switch.
A Chrysler Sebring does not have a reset switch.
There is no such part on a Chrysler Sebring.
A Chrysler Sebring does not have a reset switch.
A Chrysler Sebring does not have a reset switch.
A Chrysler Sebring does not have a reset switch. The fuel system is computer controlled with relays.A Chrysler Sebring does not have a reset switch. The fuel system is computer controlled with relays.
A Chrysler Sebring does not have an inertia or reset switch.
A Chrysler Sebring does not have any reset switches.
A Chrysler Sebring does not have a reset switch.